By default, the email alarm is not enabled in the system. You can manually enable this function as needed. After the email alarm notification function is enabled, you can receive the alarm notification sent by CSG to learn the security risks of containers and images. Otherwise, whether it is risky or not, you can only log in to the Console to view related information, and cannot receive the alarm information in time.
Procedure
1. Log in to the CSG Console.
2. On the left navigation bar, select Alam > Alarm settings to go to the Alarm settings page.
3. Set the"Enable email alarm" button to 
and enable the email alarm function.
4. Configure alarm parameters.
Parameter | Description |
Select an alarm level | You can check the alarm level for the email notification. |
The sending interval for alarm emails | You can configure the time interval for sending emails. For example, if the parameter is set to 60 minutes, it indicates that an alarm email is sent every hour. |
Unprocessed Alarm Reminder Interval | You can configure the email prompt for emails that are not processed. For example, if the parameter is set to 60 minutes, it indicates that an alarm email is sent every hour for alarms that are not processed. |
List of recipient email | You can configure the email address to receive alarm notifications. Multiple emails are separated by a comma (,). |
5. Once the configuration is complete, click"save".