Step 1: Select an operating system.
When you select a Windows operating system, note that the environment must meet the following requirements:
Mainstream 64-bit Windows operating systems are supported, including:
Windows Server 2008
Windows Server 2012
Windows Server 2016
Windows Server 2019
Windows Vista
Windows 7
Windows 8
Windows 10
Make sure that the firewall of directly connected hosts can communicate with the Qingteng server.
The PowerShell component is required when the agent is installed through the command on directly connected hosts.
Make sure that the hosts connected through the proxy are connected to the SOCKS5 proxy service of the management server.
When a trust relationship cannot be established for the SSL/TLS secure channel, use the solution described in the system FAQ, as shown in the following figure.
tep 2: Set host information.
Communication protocol: You can select IPv4 or IPv6.
Connection method: You can select direct connection or proxy connection.
Service group of the host: You can select the service group of the host on which agent is installed.You can click Service Group Management to directly go to the service group page for managing service groups.
Make sure that the hosts connected through the proxy can communicate with Server Security Defender.
When filling in the proxy address, enter the address in the format of Domain name:Port or IPv4 address:Port. Example:
Step 3: Follow the installation guide.
In Windows, you can use one of the following methods to install the agent: install command, installation package, or command + installation package.
[Command]
- This method is suitable for batch installing the agent on multiple hosts. (The PowerShell component is required.)
Select the directory in which the agent is to be installed (default: C:\Program Files\TitanAgent), select the application for command execution (CMD or PowerShell), and run the command as an administrator in the application to install the agent.
[Installation Package]
- This method is suitable for installing the agent on a single host. You can use the UI to install the agent.
Download the installation package, follow the installation process, fill in the installation parameters required by the installer, and click Install to install the agent.
[Installation package + Command]
- This method is suitable for batch installing the agent on multiple hosts. To install the agent, the installation package is first delivered to each host. Then, you must download the installation package, and specify the location of the installation package and the directory in which the agent is to be installed (default: C:\Program Files\TitanAgent) to generate the installation command for batch execution. After the command is generated, run the command as an administrator in cmd to install the agent.