Scenario
After a physical server is created, if disks are insufficient or the current disks do not meet requirements, you can mount existing disks to the physical server, or create a new disk and mount it to the physical server.
Before You Begin
l An available disk is created.
l The disk to mount is in the same availability zone as the physical server.
l The status of the physical server is Running or Shutdown.
l If it is a non-shared disk, the EVS to mount is Available.
l You cannot mount an EVS to some physical server specifications or images because they are not equipped with smart NICs or for some other reasons.
Operation Steps
1. Log in to eSurfing Cloud and go to the console.
2. Click 
at the top of the console, and select a region. In this topic, Hong Kong 2 is selected.
3. In the left-side navigation pane, go to Computing > Physical Server Service to go to the physical server list.
4. In the Name/Server Name column, click Instance Name of the target physical server to go to the physical server details page.
5. On the tab below, click Elastic Volume Service and on the EVS page, click Mount Disk in the upper right corner. Check the disk to mount and click OK.
6. After the command is delivered, wait for a while and refresh the page to display the mounted disk.